Bromadiolone 0.005% Rodenticide Wax Blocks A

In a tropical port, humidity is the working condition rather than the exception. Transit sheds, food-processing halls and container yards run damp for months, and grain or loose bait left in that air can cake, slump or sour before a rodent ever reaches it. Sites like these need a bait format that survives the climate it is stored in, not one that has to be replaced after every wet week.

Wax Blocks Built for Wet Stores and Coastal Humidity

A paraffin-bound bromadiolone wax block holds its shape while the air around it stays wet. What an operator sets on day one is still a block at the next inspection, so the dose per point stays predictable across a long programme. Placement and station requirements still follow the label for the market.

A Centre Hole That Anchors the Bait

The moulded centre hole takes a station rod, wire or fixing, so the block sits where it was set instead of being dragged into a corner. On a site with dozens of stations, red blocks are also quick to count against a baiting record. Keep every block inside a secured station and follow local label requirements on access by children, pets and non-target animals.

Handling, Stacking and Transport Without Breakage

Bulk sites move pallets, not single blocks. A compressed block resists the chipping and powdering that loose bait suffers when cartons are stacked and shifted, which keeps the product area cleaner and makes replenishment easier to plan across a large facility.

Bromadiolone belongs to the second-generation anticoagulant group. Once a rodent has taken enough bait, the active ingredient disrupts the vitamin K cycle that keeps blood clotting, and the effect builds over the days that follow rather than at the moment of feeding.

That delay is what makes a baiting programme work. Because there is no immediate reaction, rodents do not connect the bait with feeling unwell, so the same stations keep being visited and the whole population is exposed through repeated feeding.

Why a Paraffin Block Suits a Wet Store

A block is a handling decision as much as a formulation decision. In a wet port warehouse, the paraffin matrix keeps the dose together while staff move stations, sweep floors and shift pallets, and the fixed shape means the amount placed at each point stays predictable.

It also makes inspection faster. A glance at the station shows whether the block is intact, chewed or contaminated, and the record can be closed without sifting through scattered grain.

1. Identify Rodent Activity

Walk the site before placing anything. Droppings, gnaw marks, greasy runways and burrow openings tell you where stations belong; placing bait where there is no activity wastes product and hides the real pressure points.

2. Secure the Wax Blocks

Thread each bromadiolone wax block onto the station rod through its centre hole and close the station. Set stations along runways, wall bases and confirmed activity. Apply 10-15 g per bait point and two bait points per 15 m2 of indoor floor area, as the product label states. Put out the full amount the treatment calls for at the start, as the label instructs, so bait is never interrupted during the first days. Keep product away from food, feed and water, and keep stations out of reach of children, pets and non-target animals.

3. Inspect and Replenish

Open every station on the cycle the label sets. Replace blocks that have been eaten, damaged or fouled, and record what you took out. At the end of the programme, lift the remaining bait and dispose of it as the label and local rules require.

4. Safe Handling

Wear appropriate protective equipment when handling bait and avoid unnecessary contact with the product. When removing rodent carcasses, use suitable protective gloves and follow local disposal requirements. Dead rodents and leftover bait should be incinerated or buried as directed on the label, and disposal must comply with applicable local regulations; do not contaminate water, food or feed.

Anticoagulant rodenticides carry a secondary-poisoning risk to predators, scavengers and pets that consume poisoned rodents, so carcasses should be searched for and disposed of as the label directs, and working animals kept away from bait points and disposal areas. Do not reuse the packaging for other purposes. Store the product in a dry, cool, rain-proof place away from fire, out of reach of children, and never together with food, feed, drinking water or animal feed, as stated on the label.

The registered use is indoor placement inside protective bait stations. Within that scope the product suits:

• Racking aisles and loading bays of distribution warehouses
• Indoor grain-handling, milling and food-processing halls
• Food storage rooms and packing lines
• Industrial plants and commercial premises
• Institutional buildings with staff or service areas
• Residential common areas where the local label permits

Any deployment that extends beyond the registered scope must adhere to the labeling and registration documentation corresponding to the target market.

Accidental ingestion requires immediate medical attention. Take the product label or packaging to the medical professional. Signs of anticoagulant poisoning include bleeding of the gums or nose, subcutaneous bleeding, blood in urine or stool, and in severe cases multiple bleeding sites, severe abdominal or back pain and loss of consciousness. If discomfort occurs during or after use, stop contact immediately, carry out first aid and take the label to a hospital. Skin contact should be washed promptly with soap and clean water. Vitamin K1 is the specific antidote, and treatment must be given under medical supervision according to local medical guidance and the registered label.

100g pouch. The pack confirmed for this product - a trial and household size that lets an importer test the block before booking a container, and a retail-ready format for distributors.

500g pouch. Sized for site teams and municipal contracts that replenish on a weekly route.

5kg pail. The working pack for pest control companies running contracted accounts.

25kg non-retail pail. A bulk export pack for wholesalers, importers and OEM buyers.

Custom pouch and pail formats, private labels and multilingual labelling may be available on request.

Jiebao Biotech is an experienced manufacturer of household and public health pest control products, specializing in the research, development, and production of professional pest management solutions. With extensive industry experience, we provide reliable products and flexible supply solutions for distributors, importers, pest control operators, brand owners, and public health programs worldwide.

Our product portfolio covers a wide range of pest control solutions, including cockroach, mosquito, fly, ant, rodent, and other household and public health insecticide products. Our key capabilities include:

● 39,000㎡ Modern Manufacturing Facility — 46+ automated production lines supporting stable production capacity and flexible supply for bulk orders and long-term partnerships.

● Professional R&D Team — Expertise in pest control formulation development, supporting product improvement and customized solutions for different market requirements.

● Strict Quality Control — Quality management throughout raw material selection, production processes, and finished product inspection to support consistent product quality.

● International Export Experience — Products supplied to customers across Africa, Southeast Asia, the Middle East, and other global markets, with experience supporting different distribution and packaging requirements.

Q: Why specify wax blocks rather than grain bait in a wet season?

A: Grain absorbs moisture, and once it cakes or sours rodents stop taking it. A paraffin-bound block keeps its shape and its dose in the same damp air, so the bait stays in a form that can be eaten instead of breaking down on the floor.

Q: How do I fix wax blocks inside a bait station?

A: Feed the station rod or wire through the centre hole of each block and fix it inside the station. Secured bait cannot be dragged away, and children, pets and non-target animals cannot reach it. Never leave a block loose where it cannot be fixed and checked.

Q: Where should the wax blocks be placed?

A: The registered use is indoor placement in tamper-resistant stations set along walls, runways and confirmed activity. Station security and non-target precautions do not change from site to site.

Q: Can I get OEM packaging — my own pouch or pail design?

A: Yes. The 100g and 500g pouches, the 5kg pail and the 25kg non-retail pail can be supplied, and OEM or private-label branding is available subject to the registration requirements of the destination market.

Q: Are you a factory or a trading company?

A: Factory. Jiebao Biotech is an integrated pest-control manufacturer with over 25 years of production experience, covering R&D, formulation, production, sales and technical service — and we welcome facility verification and sample requests before order.